Partometer3D - camera measure
$2.59
Advertisements
About Partometer3D - camera measure
Partometer3D is camera app for area, perimeter, length and distance, height and width, ratio, circle parameters (radius, diameter), angles measurements. It can be used as a camera ruler or tape measure for accurate measurements on pictures and photos. This app allows user to make measurements in any defined direction and plane in 3D space.
The distances and object size can also be measured by Partometer App, but Partometer3D has no constrains on the camera position relative to the measured object.
The measurement plane / object plane don't have to be parallel to the camera plane.
It expands number of situations where application can be used. For example, big objects now can be measured by taking a picture from the side, objects and distances that are difficult to reach can be measured as well.
Partometer3D has the same application area as Partometer, but gives you more flexibility and power. Angle Mode / Protractor / Goniometer can be used for roof angle measurements. This data can be used in SolarMeter app for solar energy calculations.
It has following important and distinctive features:
- measure in any selected plane in 3D space
- Length, Angle, Area, Circle Modes
- add/delete any number of measurement/ruler lines
- values assigned to each ruler line
- measure objects in different directions
- save and share you measurement
- find object ratios, if you do not need absolute measurements
- compare object parts to each other
- use custom and predefined reference objects
- automatic reference object fine alignment using image processing
- reset reference object alignment by LONG TOUCH on auto alignment button
Partometer3D uses a phone/tablet camera and any available object with known size as a reference to perform measurement. To define the measurement plane a rectangular object (sheet of paper, credit card, custom object) is used. Image processing is used for automatic fine alignment with the reference object.
The App shows measurement results in different units: meters, millimeters, centimeters, feet, inches based on user settings. It also calculate dimensions of the object in relative units with respect to the reference object (ROL).
There is an option to make a picture and work with the still image instead of live camera view. Picture Load feature is also implemented to work with any picture from your photo gallery. Zoom View feature helps to align object boundaries accurately.
Partomter3D can be very useful if you need to measure bigger distances on the plane, where the simple ruler or tape is difficult to apply. All you need to do in this case is to place a rectangular object (credit card or sheet of paper) on the measurement plane,
make sure that the object of interest fits into the camera view and make measurements.
Thank you for your support.
Follow us:
Google+: +VisTechProjects
Facebook: vistech.projects
Twitter: @VTProjects
The distances and object size can also be measured by Partometer App, but Partometer3D has no constrains on the camera position relative to the measured object.
The measurement plane / object plane don't have to be parallel to the camera plane.
It expands number of situations where application can be used. For example, big objects now can be measured by taking a picture from the side, objects and distances that are difficult to reach can be measured as well.
Partometer3D has the same application area as Partometer, but gives you more flexibility and power. Angle Mode / Protractor / Goniometer can be used for roof angle measurements. This data can be used in SolarMeter app for solar energy calculations.
It has following important and distinctive features:
- measure in any selected plane in 3D space
- Length, Angle, Area, Circle Modes
- add/delete any number of measurement/ruler lines
- values assigned to each ruler line
- measure objects in different directions
- save and share you measurement
- find object ratios, if you do not need absolute measurements
- compare object parts to each other
- use custom and predefined reference objects
- automatic reference object fine alignment using image processing
- reset reference object alignment by LONG TOUCH on auto alignment button
Partometer3D uses a phone/tablet camera and any available object with known size as a reference to perform measurement. To define the measurement plane a rectangular object (sheet of paper, credit card, custom object) is used. Image processing is used for automatic fine alignment with the reference object.
The App shows measurement results in different units: meters, millimeters, centimeters, feet, inches based on user settings. It also calculate dimensions of the object in relative units with respect to the reference object (ROL).
There is an option to make a picture and work with the still image instead of live camera view. Picture Load feature is also implemented to work with any picture from your photo gallery. Zoom View feature helps to align object boundaries accurately.
Partomter3D can be very useful if you need to measure bigger distances on the plane, where the simple ruler or tape is difficult to apply. All you need to do in this case is to place a rectangular object (credit card or sheet of paper) on the measurement plane,
make sure that the object of interest fits into the camera view and make measurements.
Thank you for your support.
Follow us:
Google+: +VisTechProjects
Facebook: vistech.projects
Twitter: @VTProjects
All Application Badges
Paid
app
app
Android
2.2+
2.2+
Bug
buster
buster
Android app
App History & Updates
What's Changed
3.2 - Circle Mode
3.1.3 - yard units, use screen outside ZOOM VIEW for fine ruler adjustment
3.1.1 - sharing and saving fix for KitKat 4.4, better pic upload - Picasa, Drive, browsers
3.1 - Area mode add points, Auxiliary Plane Grid
Quick access to Units, Plane and ROL settings
Delete selected point in area mode
3.0.1 - reset reference object alignment (LONG TOUCH in auto align button)
3 - Angle, Area Modes
2 automatic object alignment
1.1 Touch to switch points under control.
3.2 - Circle Mode
3.1.3 - yard units, use screen outside ZOOM VIEW for fine ruler adjustment
3.1.1 - sharing and saving fix for KitKat 4.4, better pic upload - Picasa, Drive, browsers
3.1 - Area mode add points, Auxiliary Plane Grid
Quick access to Units, Plane and ROL settings
Delete selected point in area mode
3.0.1 - reset reference object alignment (LONG TOUCH in auto align button)
3 - Angle, Area Modes
2 automatic object alignment
1.1 Touch to switch points under control.
Price update Price changed from $2.84 to $2.59.
Name changed Name changed! Partometer3D - photo measure now is known as Partometer3D - camera measure.
Price update Price changed from $3.44 to $2.84.
Price update Price changed from $0.88 to $3.44.
What are users saying about Partometer3D - camera measure
N
by N####:
by N####:
A reasonably accurate app nearly crippled by some of the worst documentation ever written. The best first step to learning this app is to eliminate the Reference Object Line feature--go right to Preferences and drop it, it's clutter that serves no essential function--and to *fix* your reference object rectangle in place (long press the "W/H" area in the lower left side of the screen) or you run the risk of DESTROYING the measuring grid by inadvertently moving the corners of your reference plane when you start moving rulers around. And make sure the object that you're measuring is confined *exactly* in the measuring plane or the accuracy will drop dramatically. The limits inherent in this type of measuring system become apparent fairly soon, but still reasonably accurate, so 3 stars, 4 stars when those awful user guide pages are rewritten.
C
by C####:
by C####:
Read the description carefully-- this app does not work quite the way it is marketed This app DOES NOT allow you to measure in 3 dimensions. It is only a 2d measuring app. You lay down a known size reference object (a credit card or a piece of notebook paper for example) and and in your photo you use that to define the reference plane. You can then measure any 2 dimensional object in that plane only. After playing with the app, I understand why this limitation exists, but it should be made more clear before people buy. Some other issues... There is NO documentation-- the video here is it. Watch it before you buy. At least on my phone (an Lg G3), the UI is laggy and nearly unusable.. Even when it works, the UI is non-intuitive.
C
by C####:
by C####:
Buying this on recommendation from the developer after previously purchased his Millimeter Pro Screen Ruler. Looks interesting so far, will revise after playing around with it.
C
by C####:
by C####:
I have it 5 stars because it won't let me give it note. It is worth every penny!
C
by C####:
by C####:
Worth to purchase
C
by C####:
by C####:
Seemed useful for quick measurements in the field but not intuitive enough. Just carry my calipers, etc is easier.
D
by D####:
by D####:
Measured object 18.5inches long. App see its only 17inches
Q
by Q####:
by Q####:
not as it suppose to be 1.cannot load picture from gallery for measurement 2.when change mode of measure from line to circle and to other taken pic will lost and need to retake again 3.same effect then phone ring and other pop-up 4.cannot zoom 5.cannot change different type of arrow 6. ellipse? 7.what about a buttom for option on screen.
U
by U####:
by U####:
Still not happy with instructions. Please write them for dummies to understand. That said. Take very good pictures (get an app to improve picture quality) use as large a reference rectangle as you can and the app works. I will use the app to get measurments from inside and outside of buildings for making bids for work to do. I recomend -- purchase the app -- then use your head. You will be happy. Sorry about the first review.
A
by A####:
by A####:
App works but doesn't have a vast library of reference objects and requires you to set a frame of points over the object to get reference size. Also doesn't detect dimensions automatically. Should save dimensions of objects in the app for later use.
G
by G####:
by G####:
Vistech have carved a niche for useful well written properly tested Apps that always actually work and work well. Quality Control is exemplary No uneccessary bells and whistles, it just does what it says on the tin. Keep up the good work!
C
by C####:
by C####:
Seems like it could be pretty cool. It is complicated enough to need some directions or a help file, which I have yet to find.
E
by E####:
by E####:
This app seems to good to be true. Only as accurate as you define the reference object. We will be using this tool as one part of our inspection procedures.
X
by X####:
by X####:
Seemed useful for quick measurements in the field but not intuitive enough. Just carry my calipers, etc is easier.
X
by X####:
by X####:
Measured object 18.5inches long. App see its only 17inches
X
by X####:
by X####:
Great app, I would like a pinch to zoom and a windows version so I can use it on a large screen
A
by A####:
by A####:
Excell
X
by X####:
by X####:
This is a truly great product in that it takes perspective into account when measuring distances and angles. But its not truly 3D capable because objects that are not within the extension of your reference plane (i.e., credit cards) cannot accurately be measured with this. For example, try measuring angle of upper corner of a book that is placed in vertically upright position on your reference plane. This program will overestimate the angle because it assumes the angle is on the reference plane. Be aware!
X
by X####:
by X####:
Brilliant app
X
by X####:
by X####:
Great app. Very useful to me; nothing else like it. Plus it's just really cool how it works.
M
by M####:
by M####:
This app surely proofs that a phone can do more than just communications. Very useful and easy to use.
N
by N####:
by N####:
il programma funziona e' il telefono che fa schifo!
X
by X####:
by X####:
Cool.
U
by U####:
by U####:
Ok nice app but once you get the quadrant points off screen there is no reset. Very frustrating.
X
by X####:
by X####:
Not very accurate. Looking for more accuracy. Thanks
C
by C####:
by C####:
Once working the measurements it came out with for a table were not accurate. I used the A4 reference and measured both sides of the table both were difference.
X
by X####:
by X####:
I wish you had integrated these features into the original partometer app instead of making me buy two. But never the less you deserve the support and 5 stars
X
by X####:
by X####:
This is a great addition to diskometer. Thanks!
J
by J####:
by J####:
Joe Cool.
Q
by Q####:
by Q####:
Cool but Not very accurate. Looking for more accuracy. Thanks
Z
by Z####:
by Z####:
Fix quadrant reset Ok nice app but once you get the quadrant points off screen there is no reset. Very frustrating.
Y
by Y####:
by Y####:
Rubbish Doesn't have accurate measurements. Totally hopeless. Cannot even calibrate it. Sort it out guys....
Y
by Y####:
by Y####:
Measurements not accurate Once working the measurements it came out with for a table were not accurate. I used the A4 reference and measured both sides of the table both were difference.
Y
by Y####:
by Y####:
Nice This is a great addition to diskometer. Thanks!
K
by K####:
by K####:
Great app I wish you had integrated these features into the original partometer app instead of making me buy two. But never the less you deserve the support and 5 stars
by G####:
not as it suppose to be 1.cannot load picture from gallery for measurement 2.when change mode of measure from line to circle and to other taken pic will lost and need to retake again 3.same effect then phone ring and other pop-up 4.cannot zoom 5.cannot change different type of arrow 6. ellipse? 7.what about a buttom for option on screen.