Vent-Axia Connect

Vent-Axia Connect Free App

Rated 3.14/5 (21) —  Free Android application by VENT-AXIA LTD

Advertisements

About Vent-Axia Connect

Vent-Axia Connect - Functions and settings for Lo-Carbon Svara® and Sentinel Kinetic Advance® via app.

Svara® App Control
Each Vent-Axia Svara® contains a unique code, which is required to pair the fan with the app. Enter or scan the code using the app’s setup wizard. The code may be found on the back of the product manual or on the arm of the pull out motor hub.
When the fan is supplied, it is pre-set to be an automatic bathroom fan with constant trickle flow of 30m³/h and humidity / light detectors which activate to a boost flow of up to 95m³/h.
The app control via Bluetooth gives you the functionality of five fans in one. Via this app, you can set up Svara® for various functions and environments. You can easily set Svara® to function as an intermittent fan which is humidity or light activated. Via the app you can also use a simple calendar function where you can activate various functions depending on weekdays or weekends, such as purge or silent running hours. Fault indication: A red LED on the fan indicates power failure when the calendar function has been activated. This is easily recovered by the opening the app and re-synchronising with the fan.

Sentinel Kinetic Advance® App Control
The Sentinel Kinetic Advance® WiFi controller (supplied as standard with SX model) must first linked with the app before it can be used. The new device wizard guides the user through this process, involving connecting to the product’s WiFi hot-spot, then connecting securely by scanning the QR code (or entering the security key manually), as printed on the WiFi controller.
Once connected, there is the possibility to boost the Advance for a period of 15/30/45/60 minutes, configure scheduled modes, silent hours and summer bypass operation, monitor the temperatures and heat recovered by the unit and check the status of filter-change and service count-down timers.
In commissioner mode (protected behind the same PIN as the product’s touchscreen controller), the app comes into its own by allowing the preset flows to be configured, without having to return to the installed unit. This allows flows at the diffuser to be adjusted and measured in real-time.

How to Download / Install

Download and install Vent-Axia Connect version 2.0.2 on your Android device!
Downloaded 1,000+ times, content rating: Everyone
Android package: uk.ventaxia.connect, download Vent-Axia Connect.apk

All Application Badges

Free
downl.
Android
4.3+
Bug
buster
For everyone
Android app

App History & Updates

What's Changed
- Add Android 7 support for Sentinel Kinetic Advance;
- Minor bug fixes
Version update Vent-Axia Connect was updated to version 2.0.2
More downloads  Vent-Axia Connect reached 1 000 - 5 000 downloads
Version update Vent-Axia Connect was updated to version 1.1.3
More downloads  Vent-Axia Connect reached 500 - 1 000 downloads

What are users saying about Vent-Axia Connect

M70%
by M####:

If you getting connected, but can't see all the settings. Use app Resset (just resset). Restart your phone, and connect back to App... When it asks 3 questions answer NO to every of it (this is very important). And your App will give you all Settings. Thanks for reading...

M70%
by M####:

Very good app and the fan working very good in my bathroom But how we set the fan on TIMER to still run for another 2-3 minutes after the lights turns off Thank you

M70%
by M####:

Need this app to control the Vent-Axia Svara. The app is really buggy. Does not go past the Bluetooth setup on Android and crashes on iOS before finalising setup. So have a smart device and no way to control it: rubbish IoT. Fix it please.

M70%
by M####:

Not sure why some users are reporting problems with the app, it works fine for me. There are so many devices and Android versions it is more likely that rather than the fans fault. Works great on a Samsung S7 with Android 6.0.1. One thing to note is to make sure your electrician reads the instructions. If it is hard wired into the light switch as many fans are, some of the functions are not available such as the night time silent mode. Only two wires are needed not three as the fan has its own light sensor.

Y70%
by Y####:

Fan is very neat, and I like the access for cleaning the blades. However, on the website this is billed as giving the user control and the screen shots of the app and the user guide support this. The reality is that you cannot adjust the trickle speed at all. And it runs too fast. So buy if you are happy with an intrusive sounding 'trickle' and the limited adjustment on the other functions this affords. VA said there is no issue and that it is exactly as described. They are wrong. I had to use the manual sw

M70%
by M####:

The first setup questions are important as they determine whether you can use the intelligent features but you can reset the fan later if required. The app works excellently, nicely laid out, and intuitive, very impressed. I still don't know how the fan knows the time of day for quiet mode though. I've used the app on 3 different phones, all work perfectly.

W70%
by W####:

Poor poor app downloaded it hundreds of times will not connect with fan

M70%
by M####:

Paired with Bluetooth but the app kept crashing tried different approaches for over an hour. Ended up putting a different fan in for the customer at my cost. Great quiet fan but rubbish if you can't set them up.

V70%
by V####:

Saves getting tools, instructions, ladder out just to change settings. Also the Savara fan is the best humidistat fan I found, after trying three others. Comes on when it should. Never comes on when it shouldn't (after I tried each sensitivity setting to find the best one).

P70%
by P####:

Easy to configure the fan from this app and test fan speeds before saving settings. I had no issues with this app on an S7 edge.

M70%
by M####:

I see other people have issues, but for me the setup was quick and the app is easy to use

M70%
by M####:

Werkt gewoon totaal niet op een oneplus2 en Asus tablet. Support zeer slecht

M70%
by M####:

Doesn't connect, my Bluetooth settings say it's paired but the app refuses to even see the fan. Tried with two different fans as vent axia said fan must be faulty, it made no difference.

M70%
by M####:

Flat out doesn't work. Tried it on two Android devices and neither connect. I'd you're having problems try the iOS app. That worked as it should for me.

D70%
by D####:

Doesn't work on 3 devices I tried


Share The Word!


Rating Distribution

RATING
3.15
21 users

5

4

3

2

1